The MR-2614 Annunciator Driver is capable of controlling from 8 to 72 zones of 2 LEDs (alarm and trouble) or 3 LEDs each (alarm, supervisory and trouble) for use with columnar or graphic annunciators.

The MR-2614EH-Z Series Annunciators have 3 LEDs per zone, Acknowledge, Signal Silence, Reset and Lamp Test buttons and a key lock to activate the buttons complete inside a surface mount cabinet.  There are 8, 16, 24 and 48 zone models available.

The MR-2614EHS+MR-2622S is a 16 Zone Annunciator (3 LEDs per zone) complete inside a surface mount cabinet.  It mimics the display of the MR-2616 Fire Panel.  The MR-2614S is an 8 Zone Annunciator (2 LEDs per zone) complete with a surface mount cabinet.  It mimics the display of the MR-2608 Fire Panel. Both annunciators come complete with a Lamp Test button that will also locally silence the annunciator.

The MR-2614 connects to the MR-2608, MR-2616 and MR2400 Fire Panels using the annunciator port.  Connection between the MR-2614 and the MR-2900 requires the use of the MR-2109-3 line driver board in the MR-2900 to drive Port 3.  A maximum of 8 annunciators can be connected to a panel.

The LEDs are interfaced to the Annunciator Driver using the MR2622 Annunciator Strip or the MR-2915 LED Driver.  These allow up to all 72 zones to be available.  Contact the Secutron Technical Support Department for design help for requirements over 16 zones.

UL, ULC, and CFSM Listed
MEA listing pending
Surface mounting
From 8 to 72 zones of LED annunciation
4 Switch Inputs, 1 standard, 3 optional 

 MR-2915 LED DRIVER
The MR-2915 LED driver drives up to 8 zones of 3 LEDs each (alarm, supervisory and trouble) for graphic annunciators. There is a 50 pin connector for connection to a wire-wrap socket. The LEDs are connected to the wire-wrap legs of the socket. Though normally powered from the MR-2614, the LEDs connected to the MR-2915 can be powered by a separate 5VDC supply connected to the board. A jumper must be set is to use the external power supply.

MR-2622 LED STRIP
The MR-2622 LED strip driver has 8 zones of 3 LEDs each (alarm, supervisory and trouble) for columnar annunciators.  It has a jumper for setting which set of 8 zones (1 to 8, 9 to 16 or 17 to 24) it is for.
 

Download Data Sheet